⚡️ Stratums: where to connect your ASIC

All addresses for connecting ASICs to Headframe.

All the addresses for connecting your ASICs to Headframe are collected here. Copy an address and paste it into the URL field in your miner settings.




BTC (SHA-256)

TCP

  • Primary: stratum+tcp://gate.headframe.io:3010
  • Backup: stratum+tcp://gate2.headframe.io:3011

TLS

  • Primary: stratum+tls://tls-gate1.headframe.io:3010
  • Backup: stratum+tls://tls-gate2.headframe.io:3011




LTC + DOGE (Scrypt)

TCP

  • Primary: stratum+tcp://scrypt.headframe.io:3015
  • Backup: stratum+tcp://scrypt2.headframe.io:3015

TLS

  • Primary: stratum+tls://tls-scrypt.headframe.io:3015
  • Backup: stratum+tls://tls-scrypt2.headframe.io:3015




ZEC (Equihash)

TCP

  • Primary: stratum+tcp://equihash.headframe.io:3357
  • Backup: stratum+tcp://equihash2.headframe.io:3357




In what order to add them

  1. Headframe primary stratum.
  2. Headframe backup stratum.
  3. A stratum of any third-party pool on the same algorithm.

The third stratum is a must: if something happens on the main line, your ASIC switches to the backup on its own, and you don't lose income.




TCP or TLS

TCP is the standard connection and suits most miners. Minimal ping and no encryption overhead. Data is sent unencrypted, so in theory your provider can see that you are mining.

TLS is an encrypted connection. It protects against interception and helps bypass port blocking. The ping is slightly higher than with TCP. We use TLS 1.3 — the same protocol that protects online banking.

If you don't need to hide your traffic, stay on TCP: it is just as stable and secure.




Who needs TLS

  • You mine from home and don't want anyone to see your traffic.
  • Your ASICs are on a shared network, a rented site or someone else's data center.
  • You want to reduce the risk of interference from your provider or hosting site.




Which ASICs connect to TLS directly

  • Whatsminer (newer models such as M53) — connect right away.
  • Antminer (including S21) — do not connect directly, even with the latest firmware.




If your ASIC does not support TLS

  1. A proxy with TLS support. ASICs connect to a proxy inside your network, and the proxy forwards the traffic to the pool over an encrypted channel. This suits large containers with mixed devices. The proxy is set up on your side: we don't provide a ready-made solution.
  2. Firmware with TLS support for your ASIC model.
Powered by