⚡️ How to check your connection to the pool (ping and tracert)

How to run ping and tracert on Windows and macOS and what to send to support.

If your ASIC can't connect to the pool, keeps disconnecting, or shows a high reject rate, support may ask you to check your connection to our servers. It only takes a couple of minutes.

Before you start

Run the check from a computer connected to the same network (the same router) as your ASIC. Otherwise the result will show your computer's connection, not your farm's.

Step 1. Open the command line

Windows: press Win + R, type cmd and press Enter.

macOS: open Finder → Applications → Utilities → Terminal.

Step 2. Run the commands

Enter the commands one at a time. Wait for each one to finish completely before running the next.

Windows:

ping gate.headframe.io
ping gate2.headframe.io
tracert gate.headframe.io
tracert gate2.headframe.io

macOS:

ping -c 10 gate.headframe.io
ping -c 10 gate2.headframe.io
traceroute gate.headframe.io
traceroute gate2.headframe.io

A trace can take 1–2 minutes — that's normal.

Step 3. Send the result to support

Select and copy the entire output from the command line window (not just the last lines) and send it to the support chat. A screenshot is fine too, as long as the whole output fits.

Powered by